PERIGOL VCI 230

PERIGOL VCI 230 EXCOR PERIGOL VCI 230 is used to provide corrosion protection for ferrous metals, steel, cast iron, copper and aluminium alloys as well as fully or partially galvanised steel. Solvent-free PERIGOL VCI 230 contains vaporising corrosion inhibitors and may be applied via immersion, spraying or brushing. This product has been specially developed for the protection of metallic cavities. Thanks to the VCI it contains, coating the floor of a case suffices to protect the inner walls from corrosion. PERIGOL VCI 230 is compatible with a wide variety of engine and gear oils, meaning as a rule it does not have to be removed after shipment. In direct contact with metal surfaces PERIGOL VCI 230 forms an oily, non-wipeproof film on the metal surfaces which may be removed using aqueous alkaline media. PERIGOL® VCI 230 can therefore protect metal surfaces which cannot or should not come into directly contact with the oil. A precondition for atmospheric corrosion protection is a closed space in which the level of inhibitors can build up. The corrosion protection is effective on all steel, cast iron, copper and aluminium alloys, as well as fully or partially galvanised steels. PERIGOL® VCI 230 can be applied via immersion, spraying or brushing onto dry, clean, corrosion-free surfaces. Immediately after application the parts being protected must be sealed as tightly as possible to allow the protective VCI atmosphere to build up. To provide effective long-lasting corrosion protection the same general instructions apply as for all EXCOR® VCI systems. In direct contact with a metal surface PERIGOL® VCI 230 forms an oily, slippery film which can be removed with alkaline water-based cleaning agents even after storage. VCI components which are adsorbed onto metal surfaces during the vapour phase evaporate without residue within one or two hours once the part is removed from its packaging.